circuit boards (PCBs), or certain components, are made of porous materials
(fibreglass, ceramic, etc.) and can store moisture.
moisture is vaporised during reflow due to the rapid temperature rise above 217
°C. This mechanical expansion causes delamination of the component (cracks) or
PCB. This expansion is amplified by the fact that the temperatures reached are
higher than the glass transition temperature of the plastic materials: the
point at which its expansion coefficient increases strongly.
sensitive components are identified by manufacturers by a level called MSL
(Moisture Sensitivity Level) which ranges from 2 to 6. More the level is high,
the more sensitive the component. The components most often concerned are BGAs,
The JEDEC standard J-STD-033C regulates the MSL (Moisture Sensitivity Level), the backing time and the floor life. This is the maximum time between the opening of the Drypack and the reflow of the component.
How to store sensitive PCBs and components?
In order to
avoid any moisture regrowth, we store PCBs and sensitive components in an
equipment called: dry cabinet.
equipment allows us to store PCBs after drying if they are not soldered within
also allows to store MSL (Moisture Sensitivity Level) components when they are
unpacked from their Drypack protecting them from humidity.
Finally, the boards, at the end of the SMD assembly, are stored in a dry cabinet if the repair or soldering of the through-holes is not carried out during the day.
Do not hesitate to contact our customer service via chat or e-mail: firstname.lastname@example.org for all requests!